Brush on the second coat following the same order and let it dry overnight.
Sikkens cetol door and window sanding before final coat.
Let surface dry a minimum of 24 hours.
Apply one coat of cetol door window.
Apply in the direction of the grain.
Let surface dry for minimum of 24 hours 6.
After sanding the door it was refinished with a base coat of sikkens cetol 1.
Working with cetol door window preparation procedures new weathered uncoated wood sand door and window surfaces with 80 120 grit sandpaper prior to application of cetol door window.
Clean tools with mineral spirits.
Let surface dry for minimum of 24 hours 4.
Dries to touch in approximately 12 hours.
Coat all sides of door.
Apply a third coat of cetol i.
However an alternate to sanding for preparation is listed below.
Apply 3rd coat of cetol door window 7.
Apply a second coat of cetol i.
This process was repeated once more before applying the final coat of.
Re sanding may be necessary.
Do not apply cetol door window over other coatings.
Then the door was lightly sanded and cleaned again before applying a coat of sikkens cetol 23.
Available as a clear satin clear gloss or 4 ready mix colors in satin.
Working with cetol door window application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using do not apply in direct sunlight saturate all end grains nail holes and cracks in the wood.
Wait 7 days before using furniture.
Clean tools with paint thinner or mineral spirits maintenance procedures proper maintenance starts with visual inspection.
Sikkens proluxe cetol door and window is a premium translucent exterior stain whose alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas.
Dries to recoat in 24 hours additional coat may increase these times.
Let surface dry a minimum of 24 hours.
Let surface dry for minimum of 24 hours 6.
A more resilient alternative to exterior varnishes and polyurethanes.
Apply final coat and reattach hardware photo by kit latham.
Apply 2nd coat of cetol door window 5.
Application do s for cetol i and cetol 23 plus apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir before using saturate all end grains nail holes cavities and.
After the finish has dried overnight gently hand sand it with 220 grit paper.
The best method to prepare vertical wood surfaces is to sand with 80 120 grit sandpaper.
Apply second coat of cetol door window 5.
Apply third coat of cetol door window 7.
Old damaged coatings must be completely removed before application of cetol door window.
You don t want to sand through to bare wood dust the door and wipe it down with a tack cloth.
In order to restore this home s front door to its original condition our team at monk s completely stripped the door and sanded it to the bare wood.
Application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using saturate all end grains nail holes and cracks in the wood.
Clean tools with mineral spirits.